Neutral sample
Stick drift and deadzone
Set the controller on a steady surface and do not touch either stick during the sample.
Ready for an 8-second sample.
Xbox pro controller profile
Xbox Elite Series 2 Controller Test
Test Xbox Elite Series 2 standard buttons, sticks, D-pad, and triggers. Account for profiles, paddles, and trigger stops.
Local-only test
Connect with USB, Bluetooth, or a supported wireless adapter. Then press any controller button so your browser can expose it. Your readings are processed on this device.
Detected device
No controller detected
Gamepad API ready · waiting for input
L1
R1
L
R
Update rate— Hzbrowser-observed
Buttons—reported
Axes—reported
Mapping—browser label
Live input
Sticks and triggers
Left trigger 0%
Observed range: not sampled
Right trigger 0%
Observed range: not sampled
Full movement
Range and circularity
Rotate each stick slowly around the outer edge, then sweep the center in several directions.
Move the sticks to begin range tracking.
Input coverage
Buttons and D-pad
Press and release every available control. Analog buttons show their reported value.
No button activity yet.
Raw browser data
Axes and mapping
Use these values to spot unusual layouts. A blank standard mapping does not automatically mean the controller is defective.
View raw browser data
Connect a controller to view raw data.
Optional capability
Vibration check
Browser haptics are not available for every controller, connection method, operating system, or browser.
Connect a controller to check browser support.
Did you feel the pulse?
Private test record
Keep your result
Reports are stored in this browser. Sharing is optional and puts only the selected result in the link.
Diagnostic readings describe what this browser receives, not electrical measurements from the controller. Confirm important findings in the game or device where you plan to use the controller.
What this browser check can reveal
The Xbox Elite Wireless Controller Series 2 exposes familiar Xbox inputs, while profiles, paddles, adjustable sticks, and trigger stops add configuration variables. Use this page to check the standard gamepad states that reach your browser.
Test every hardware profile you use and note the active setup in your saved report. Rear paddles often duplicate another control through an onboard mapping and may not appear as independent browser buttons.
Before judging trigger range, set the physical hair-trigger locks consistently. For stick comparisons, keep the selected response curve and tension setup unchanged in supported Xbox configuration software.
Start with a known, stable connection.
- ✓Standard Xbox input coverage across saved profiles
- ✓Left- and right-stick center and range comparison
- ✓Trigger travel check with hair-trigger lock reminder
- ✓Raw input view for profile and paddle troubleshooting
A practical controller checklist.
- 01
Confirm the controller appears and the reported name or identifier is plausible.
- 02
Press and release every button, D-pad direction, stick click, bumper, and trigger.
- 03
Run the hands-off drift sample, then sweep both sticks through their full range.
- 04
Disconnect and repeat in the connection mode you actually plan to use.
- 05
Verify any fault inside a supported game or console before making a purchase or repair decision.
Compatibility is a chain, not a promise
Record the active hardware profile and trigger-lock position before comparing results.
Xbox Elite Series 2 Controller Test questions
Why do paddles not show as separate buttons?
Elite paddles commonly send the standard button assigned in the active profile. The browser receives that resulting input rather than a unique paddle identity.
Why does a trigger stop early?
A hair-trigger lock intentionally reduces physical travel. Compare sides only when their locks and profile settings match.
Can this page edit Elite profiles?
No. Use the official Xbox Accessories app or a supported console to configure profiles, response curves, paddles, and firmware.